A.K.E Power | Charger

40/60AMP Pro Brushless Motor ESC

A.K.E Pro Brushless ESC is available in both 40A and 60A(OPTO and /w UBEC). Key features include continuous 40A (60A surge @10s) and 60A (80A surge @ 10s). Designed for Ni-MH 5-18 cell or Li-Poly 2-6 cell. The Pro Brushless ESC has lowest internal resistance on market when compared to compatible ESCs which increase vertical power as well as runtime. Big heat sink has a very good cooling effect. Extreme low resistance PCB is used at power output section to get the best current endurance capability.Military standard capacitor with extreme low resistance is used at voltage input section, this will increase the ability of prevention of unwanted RF Noise/ Interference during flying. Full Protection Features: Low voltage cutoff protection / over-heat protection / throttle signal lost protection. Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.

Pro ESC 60A Specification (OPTO/UBEC)

Output: Continuous 60A, Burst 80A up to 10 Secs.
Input Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.
BEC: OPTO or 5V/3A (UBEC Version)
Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM.
Size: 12mm x 31mm x 75mm (OPTO)
14mm x 31mm x 75mm (UBEC)
Weight: 56g (OPTO) ; 63g (UBEC)

Pro ESC 40A Specification (UBEC)

Output: Continuous 40A, Burst 60A up to 10 Secs.
Input Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.
UBEC: 5V/3A
Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM.
(BLM: BrushLess Motor)
Size: 13.8mm x 28mm x 50mm
Weight: 37g